HP/Agilent 4194A Impedance/ Gain Phase Analyzer

admin — Wed, 02 May 2012 14:51:31 +0000

The 4194A impedance/gain-phase analyzer is an integrated solution for efficient measurement and analysis or go/no-go testing of components and circuits. Detailed impedance and transmission characteristics, including secondary parameter derivations, can be simply and quickly evaluated or tested. The 4194A can contribute to improving engineering productivity and reducing test cost. The analyzer is flexible and has wide measurement capabilities in both impedance and transmission measurements. It is also fully programmable using Auto Sequence Programming (ASP). Desired measurements and computations, including graphics analysis, can be programmed simply by storing front-panel keystroke operations, allowing you to customize measurements, computation, and analysis functions. The 4194A also features high-accuracy and error elimination functions to ensure reliable measurements.

HP/Agilent 8562A, 100Hz to 22 GHz Portable RF Spectrum Analyzer

admin — Fri, 24 Feb 2012 13:25:38 +0000

The HP 8562A, Spectrum Analyzer, covers the frequency range from 9kHz to 22GHz.The 8562A Spectrum Analyzer, is an ideal choice for stimulus response measurements. Provides up to 118 dB dynamic range and offset tracking capability when synthesized sources are used for stepped distortion and stepped conversion-loss measurements

HP/Agilent 4284A/001 Precision LCR Meter, 20 Hz to 1 MHz

admin — Thu, 23 Feb 2012 15:55:51 +0000

The 4284A precision LCR meter is a cost-effective solution for component and material measurement. The wide 20 Hz to 1 MHz test frequency range and superior test-signal performance allow the 4284A to test components to the most commonly-used test standards, such as IEC/MIL standards, and under conditions that simulate the intended application. Whether in research and development, production, quality assurance, or incoming inspection, the 4284A will meet all of your LCR meter test and measurement requirements.

HP/Agilent DSO5032A 5000 Series Oscilloscope: 300 MHz, 2 channels

admin — Mon, 30 Jan 2012 22:43:59 +0000

Agilent’s 5000 series delivers our proprietary MegaZoom III technology in a small benchtop package. By combining fast sample rates with deep memory and impressive update rates, these scopes help you avoid the trade-offs associated with typical bench scopes.

HP/Agilent 8753ES/006/1D5 Network Analyzer, 30 KHz – 6 GHz

admin — Wed, 07 Dec 2011 16:20:44 +0000

The HP/Agilent 8753ES/006/1D5 30 kHz to 6 GHz RF Network Analyzer’s ease of use and high performance make it ideal for use in research and development as well as on the production floor. The integrated S-parameter test set covers ranges from 30 kHz to 3 or 6 GHz and it offers 110 db dynamic range. With four independent channels displaying all four S-parameters simultaneously the 8753ES is a powerful tool for your measurement requirements. In addition the 8753ES includes frequency and power sweeps, fast sweep and data transfer speeds, pass / fail testing and magnitude and phase measurements in both forward and reverse directions. Includes option 006 and 1D5.

HP/Agilent E4402B Spectrum Analyzer, 9KHz – 3.0 GHz

admin — Thu, 29 Sep 2011 16:53:48 +0000

HP/Agilent E4402B spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of “super-heterodyne receiver” to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the LCD of the Agilent E4402B. The LCD displays received signal strength (y-axis) against frequency ( x-axis).

Instek GAP-802

admin — Sat, 24 Sep 2011 23:21:32 +0000

Pre-amplifier 20dB gain

Instek GAP-801

admin — Sat, 24 Sep 2011 23:21:32 +0000

Pre-amplifier 10dB gain

Instek ADP-001

admin — Sat, 24 Sep 2011 23:21:32 +0000

N type – BNC Adaptor for the Antenna

Instek ATA-001

admin — Sat, 24 Sep 2011 23:21:32 +0000

BNC Antenna generally you need the N type adpt